Tŷ-Mawr's Renosil Pure Mineral Based Paints - Colours of Wales
Suitable for external walls, this is a highly technical, pure silicate paint, free of artificial resins, solvents and biocides. It has been produced and used in Germany for 100 years and so has an excellent track record.
A passive silicate paint designed for previously painted surfaces, difficult to treat surfaces and thin-coat acrylic renders.
Disclaimer: Please note that whilst every effort has been made to ensure the accuracy of the colours on this chart, due to the limitations of digital & printing processes, variations will occur. They are therefore produced purely to give an indication of our range for you to be able to select samples. Samples should be purchased and applied in situ. We cannot be held responsible for any loss, damage or costs incurred as a result of choosing and using a colour based solely on the colour chart or digital media.
Made to Order
Parcel Delivery
Suitable for external walls, this is a highly technical, pure silicate paint, free of artificial resins, solvents and biocides. It has been produced and used in Germany for 100 years and so has an excellent track record.
A passive silicate paint designed for previously painted surfaces, difficult to treat surfaces and thin-coat acrylic renders.
Tŷ-Mawr's Colours of Wales - this colour palatte has been based on site research into the indigenous colours of Wales. Three categories were studied:
- Mountain
- Valley
- Coast
to provide a finish for buidings with a sense of place and belonging in their landscape. The use of colour in the natural environment compliments Tŷ-Mawr's commitment to thoughtful design and our holistic approach to environmental conservation. It is fitting that paints which work with the environment, allow buildings to 'breathe', should find their provenance in bedrock, vegetation, earth and sea.
- Carefully cover surfaces which are not to be treated - especially glass, ceramics, window sills, to protect them from splashes.
- Gently clean surfaces that are to be painted. Remove cracked, loose old coatings. Check adhesion and firmness of remaining coats.
- Use Beeck’s Fungicide (if needed to remove lichen).
- Carry out any repairs using appropriate materials, allow to cure. Please see technical Data Sheet.
- Where any sanding on the surface has occurred, apply Beeck’s Fixative diluted with 2 parts water, using a brush.
- The paints are mixed to order, only use containers from the same production batch on single areas.
- Mix up a primer coat with Beeck’s Renosil Coarse and 10% Fixative, by volume. Thinning with Beeck’s Fixative makes Beeck’s Renosil Coarse optimally coat-able.
- Before use, stir BEECK Renosil Coarse thoroughly with a powered mixing paddle.
- Apply first coat with Beeck’s Renosil Coarse and Beeck’s Fixative up to 10%.
- Apply second coat in Beeck’s Renosil Fine, diluted with 5% water by volume.
- Protect freshly coatings from the rain; hang up scaffolding sheeting in front of the surface worked on.
Suitable For
- External Renders
- Stone & Brick
- Lime Renders
- Cement Renders
- Synthetic Paints
- Mineral Paints
- Concrete
Coverage Rate
- Coarse - 4m² per kg
- Fine - 8m² per litre
- Use on facades
- Levels out minor structural defects and hairline cracks
- Remineralises surfaces
- Nonflammable
- Water vapour permeable and valuable building physics properties
- Natural alkalinity helps to prevent algae and mould
- Matt and mineral
- Highly opaque
- Maximum colour fastness A1
Coarse
- 8kg
- 20kg
Fine
- 1l
- 5l
- 12.5l
