SurfaPore R
Water Repellent for clay-based surfaces.
SurfaPore™ R is a water emulsion formulation, composed of nanoparticles, that preserves the aesthetic appearance of clay surfaces while protecting them against water penetration, deterioration and from “greening” of mould growth.
Water Repellent for clay-based surfaces.
SurfaPore™ R is a water emulsion formulation, composed of nanoparticles, that preserves the aesthetic appearance of clay surfaces while protecting them against water penetration, deterioration and from “greening” of mould growth.
Most traditional sealers are based on plastic or small silicone-based molecules that create an impermeable water barrier. Instead of covering the clay surface with polymerizing additives, SurfaPore™ R “dresses” the pores, the capillaries and the “free” surface of a claybased product with hydrophobic materials compelling the penetration of water impossible, while the surface is able to “breathe”.
Hence, treated with SurfaPore™ R clay-based surfaces remain protected against “greening”, corrosion and cracking due to frost.
Water repellent for clay-based surfaces, such as roof tiles, cotto and pottery. Ideal for frost threat protection, mould growth protection and efflorescence prevention.
Surface Application:
- The application surface should be dry and clean.
- Apply SurfaPore R by using a brush, a roller or spray gun.
- No dilution is required.
- On very absorptive surfaces re-apply within 3 hours.
Dipping:
- Dip the clay-based surface in SurfaPore R for 30 seconds.
- In any case (surface application or dipping) test results on a small area before full-scale application.
- Maximum water repellency is achieved 24 hours post application.
Consumption:
- Estimated consumption rate 9-11 m2/L, strongly dependant on the properties of the surface applied.
- Very effective & Nano-based.
- High breathability.
- Non film forming – Invisible.
- Long-lasting & UV-resistant.
- Easy application on surface or by dipping.
- Water-based.
- Environmentally friendly.
- Cost-effective
