Beeck's Gypsum Primer

General information

• Check substrate suitability as required (see datasheet). Pay particular attention to the absorbency, strength and texture of the respective substrate. Try out on a test area before using on high quality and critical surfaces.
• Carefully cover surfaces which are not to be treated – especially glass, ceramics, window sills, expansion joints, lacquer and anodic coatings – and protect them from splashes.
• Provide personal protective equipment.
• Before use, stir BEECK Gypsum Primer Fine thoroughly with a powered mixing paddle.
• Apply unthinned or if used on highly absorbent, gypsum-based substrates: thin with approx. 5 % water.
• Do not use on hot surfaces.
• Minimum application temperature: +8°C

Application

• With roller, brush or using an airless spraying method. Apply to self-contained areas with an absolutely thin coating, no overlapping, in one continuous pass by cross coating.
• Application with roller or brush:
• Rollers and brushes with a uniform coating finish are suitable.
• Avoid roller edges, overlapping and overcoating coats that have already begun to dry.
• Cut-in edges smoothly and seamlessly, wet-on-wet, together with the main area.
• As a brushed surface, use a BEECK Mineral Paint Brush to spread without brushing in any particular direction.
• Topcoats after at least 12 hours with BEECK interior silicate paints.