Warm Roof - Design – Example Build Ups of whole system
Bethany Evans Posted this on 07 Jun 2024
Option 1 |
||
Above Rafters |
35mm Insulating Woodfibre Sarking Board |
|
Fully Fill Between Rafters |
200mm of Insulation chosen from below: Tŷ-Mawr Thermafleece® Cosywool/Ultrawool, NatraHemp |
|
Below Rafters |
Intello Plus fully taped (if air tightness required) |
|
Celenit 25mm Wood Wool board and approved washer fixings at 8 per m2 |
Insulating Woodfibre 60mm T&G boards and approved washer fixings at 8 per m2 |
|
2 x 6mm Fine Hemp Plaster with mesh* which can be finished with 1 x 3mm Superfine Plaster for a finer finish or 1 x 10mm Base Coat SecilTek Isovit (meshed) & 1 x 3mm Top Coat SecilTek Cal AC |
||
Vapour permeable Paint Finish - Internal Silicate Paint, Tŷ-Mawr Limewash, Clay Paint, Ecosphere |
Option 2 |
||
Above Rafters |
60mm Insulating Woodfibre Sarking Board |
|
Fully Fill Between Rafters |
200mm of Insulation chosen from below: Tŷ-Mawr Thermafleece® Cosywool/Ultrawool, NatraHemp |
|
Below Rafters |
Intello Plus fully taped (if air tightness required) |
|
Celenit 25mm Wood Wool board and approved washer fixings at 8 per m2 |
Insulating Woodfibre 60mm T&G boards and approved washer fixings at 8 per m2 |
|
2 x 6mm Fine Hemp Plaster with mesh* which can be finished with 1 x 3mm Superfine Plaster for a finer finish or 1 x 10mm Base Coat SecilTek Isovit (meshed) & 1 x 3mm Top Coat SecilTek Cal AC |
||
Vapour permeable Paint Finish - Internal Silicate Paint, Tŷ-Mawr Limewash, Clay Paint, Ecosphere |
Option 3 |
||
Above Rafters |
Proclima Solitex plus fully taped windtight membrane |
|
Fully Fill Between Rafters |
200mm of Insulation chosen from below: Tŷ-Mawr Thermafleece® Cosywool/Ultrawool, NatraHemp |
|
Below Rafters |
Intello Plus fully taped (if air tightness required) |
|
Celenit 25mm Wood Wool board and approved washer fixings at 8 per m2 |
Insulating Woodfibre 60mm T&G boards and approved washer fixings at 8 per m2 |
|
2 x 6mm Fine Hemp Plaster with mesh* which can be finished with 1 x 3mm Superfine Plaster for a finer finish or 1 x 10mm Base Coat SecilTek Isovit (meshed) & 1 x 3mm Top Coat SecilTek Cal AC |