Beeck's Fungicide

General information

• Check substrate suitability as required (see 2.1). Pay particular attention to the absorbency, strength, texture, as well as the exposure of the respective surface to the weather and dirt. Examine critical areas and try out product on a test area on site.
• As a biocidal product, solely approved for use by professionals and commercial users. To be used on façades only.
• Note and follow official instructions regarding façade cleaning, collection and discharge of wastewater. Obtain permits.
• Carefully cover surfaces which are not to be treated – especially glass, ceramics, window sills, expansion joints, lacquer and anodic coatings, plants, the ground and traffic areas – and protect them from splashes.
• Note and follow the safety instructions
• Provide personal protective equipment.
• Do not use in wet conditions, if there is a risk of frost, on hot surfaces, if it is windy (drift!), or in the blazing sun.
• Application temperature: +5°C to +25°C

Application 

• Clean façade thoroughly using a high-pressure cleaning or dry particle blasting method. Remove infestation, moss, dirt and peeling coatings e.g. using a nylon brush. Thoroughly remove roots from creepers like ivy or vine mechanical or with flame cleaning because of a risk of discoloration when over coating.
• After drying of the façade, apply BEECK Fungicide with a saturating, pore-deep coat and do not rinse off.
• Only use on dry substrates. Allow façade to dry a few days after high-pressure cleaning especially when working on ETICs or in wet weather conditions.
• BEECK Fungicide is ready-to-use. Apply undiluted by brush. Do not spray or spatter.
• Further treatment with BEECK Silicate Paints after a minimum of 6 hours. Protect fresh coated facades from rain.