Beeck's Fixative/Primer

General information

• Check substrate suitability as required (see 2.1 and 2.3). Pay particular attention to the absorbency, strength and texture of the respective substrate. Try out on a test area before using on high quality and critical surfaces.
• Ensure that the product is used by qualified persons only.
• Carefully cover surfaces which are not to be treated – especially glass, ceramics, window sills, expansion joints, lacquer and anodic coatings – and protect them from splashes.
• Especially if using tinted coatings: Always use containers of product from the same production batch to paint self-contained areas.
• Ensure sufficient qualified workers and a smooth, uninterrupted coating process.
• Do not use in wet conditions, if there is a risk of frost, on hot surfaces or in the blazing sun.
• Minimum application temperature: +8°C
• Drying time: at least 12 hours per coat
• Protect fresh coats from rain and the blazing sun. Hang up scaffolding sheeting in front of the surface worked on.

Application

• Primer for absorbent, water-wettable, mineral substrates:
  • Thin 1 part BEECK Fixative with 2 parts water.
  • Apply thickly with BEECK Mineral Paint Brush until saturated.
  • Carefully spread out surplus coating in less absorbent areas..
• Thinner for one-pack BEECK Silicate Paints, e.g. Maxil
  
  • Ad mixture quantities depend on the substrate, weather and work method.
  • Please refer to the relevant technical data sheet.